Rigid tank for drinking water
Basic tank type ATANK
This new range of tanks is made of thick walled high grade linear polythene, which suitable for drinking water on board boats. The construction of the tanks is seamless and therefore can never leak. The contents level can be seen from outside for easy checking.
The ATANK range is also suitable for waste water or diesel fuel. The tanks are supplied with labels which are used to specify the tank contents (fresh water, waste water or diesel). The new inspection lid type ILT permits easy access for cleaning and sterilising the fresh water tank. The tanks are supplied without fittings and therefore these can be installed wherever you choose. Fittings can be order her at this website and can be used for all tanks.
• The tank is suitable for fresh water, waste water or diesel (up to 100°C)
• Use the same code for a fresh water tank, waste water tank or diesel tank,
• The wall thickness of 5 to 7 mm (depending on tank dimension) prevents permeation of odours and distortion of the tank
• Available with capacities of 42, 61, 88, 110, 137, 170, 215, 335, and 390 litres.
• Colour: Light blue translucent
Complete Premium Drinking Water System type DWS
These VETUS tank systems feature a high grade synthetic tank suitable for drinking water, together with an electric pump. Utilising a variable speed pump motor, an inbuilt sensor regulates the water pressure and ensures a steady flow. Therefore, a conventional pressurised water system is no longer required and installation time can be greatly reduced. All connections for filling 0 38 mm, suction and ventilation 0 16 mm are supplied installed, together with a filter in the suction line and an ultrasonic level sensor. An inspection cover, for cleaning the inside of the tank is also fitted as standard. These systems are available with tank capacities of 42, 61, 88 or 120 litres. The pump motor is available for 12 or 24 Volt and the output is 13.5 l/min at zero head. All these tanks are supplied with pump, ultrasonic level sensor and connectors.
Basic tank including connectors type WTANKC
This range of rigid VETUS tanks is designed for drinking water. The high-grade synthetic material used is the same as all other rigid VETUS drinking water tanks and they are available with capacities of 40, 60 or 80 litres. These tanks will save considerable installation time, because they are supplied with all the required connections! The centre point for a SAE flange gauge sender is incorporated in the moulding together with 5 blind bolt holes.The relevant gauge sender should be ordered sepatately and the appropriate hole cut in the tank.
Complete "Comfort" Drinking Water System type DWSC NEW
Based on the well known DWS systems, VETUS now introduces a comfort version of these ready to go drinking water systems.
These DWS comfort systems feature a high grade synthetic tank suitable for drinking water, together with an electric pump. The pump automatically switches on when the pressure in the system drops, for example when a tap is opened.
All connections for filling 0 38 mm, suction and ventilation 0 16 mm are supplied installed, together with a filter in the suction line and a float sensor to connect a level gauge. An inspection cover, for cleaning the inside of the tank is also fitted as standard. These systems are available with a tank capacity of 120 litres. The pump motor is available for 12 or 24 Volt and the output is 13.5 l/min at zero head.
Flexible tank for drinking water
Flexible tank type TANKW
These tanks can be installed easily and quickly; they assume the shape of the space, in which they are placed and they can be positioned in places that are normally difficult to reach. Also, generally speaking, there is no need for any additional installation parts. In fact, fitting the outlet nipple and connecting the hoses for inlet and outlet are the only things to be done.
We not only weld the seams, but in addition we also weld an extra strip. This makes the VETUS flexible tank resistant against much higher pressures, especially if the contents are moving when the boat is rolling or pitching.
Each flexible drinking water tank has two right angle nipples as standard supply: one for connection to the filling pipe (0 38 mm) and the other one for connection to the pump hose (0 16 mm). The filler nipple comes fitted to the top of the tank and the other one is supplied loose for easy fitment in any desired position. Additional nipples can be supplied as an option.
The fabric of VETUS flexible water tanks consists of three layers 1. A wear resistant layer 2. A reinforcement layer 3. A layer suitable for contact with drinking water.